- Help & Advice
- Buying Options
David's ISOPON P38 Easy Sand 250ml
The David's ISOPON P38 Easy Sand polyester filler is a two component chemical paste used for the filling of holes and imperfections in surfaces such as steel and GRP.
ISOPEN P38 has been specially formulated for the professional user and combines good filling and smooth sanding properties together with ease of sanding. It can be used on the following surfaces; bare metal (degrease and abrade with P80 paper), original paint surfaces (with the exception of thermoplastic acrylics - degrease and abrade with P180 paper) and GRP (degrease and abrade with P80 paper).
David's ISOPON P38 Easy Sand 250ml Extra Info
- Two component chemical paste used for the filling of holes & imperfections
- Formulated for the professional user
- Suitable for surfaces such as steel & GRP
- Sandable after 20 minutes (at 20C)
- Can be over-painted with most paint systems including 2K
Rated 4 out of 5 by 5 reviewers.Rated 2 out of 5 by id1brok Easy to use filler paste. In comparison with other fillers, P38 presents a smooth paste which mixes easily with the hardener. It is wisest to build up in layers to just proud of the repair. The results are good but always need a final skim to get rid of faults. My biggest crib rests on the fact that you only get half a tin and the price would justify a full one. This is misleading packaging (Which Dec 2014) and is very annoying. Apart from that, it is a good product although expensive. 07 September 2015Rated 5 out of 5 by Angus73 Isopon P38 alternative use I use this product in house renovation instead of plastic wood or filler for DIY. I cures fast, does not crack, sticks to various materials and does not have to be built up in many layers. Its useful for filling gaps, dents and unused holes in painted woodwork and small damaged areas on kitchen units which can be sprayed and polished in. You can progress with grades of wet and dry sandpaper to achieve a good finish. 24 June 2015Rated 4 out of 5 by Guy13 good stuff Used this to fill in two holes in a fibreglass bonnet. I covered the back of the hole with fibreglass strips and resin so that this filler had something to sit on. It dried pretty quickly and was so simple to sand flat and smooth. Buying it again. 01 May 2013Rated 5 out of 5 by CATHONY EASY TO USE, exactly as it says used this product regularly, usually buy the larger tin from a body-shop supplies, but had run out on a weekend. 04 December 2012Rated 4 out of 5 by wise p38 filler this filler did as it said on thr tin, was very good at filling a small dent on the car 14 March 20121-5 of 5
You can buy this product from one of our carefully selected Approved Partners. The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready.
You can purchase products supplied by Halfords and selected other suppliers on halfords.com.
Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.Showing 1 - X of our buying options
Price Seller Info Purchase