Holts Cataloy Knifing Putty 100g
Fitted bundle deal
includes Accessories + Fitting
Sorry - this product is unavailable right now
- Help & Advice
- Buying Options
Holts Cataloy Knifing Putty
The Holts Cataloy Knifing Putty fills surface scratches and stone chips and gives an extra smooth finish prior to painting. The Holts Cataloy knifing putty is an acrylic based paste which is suitable for all car finishes and can be used on bare metal, primer or with body filler paste. Holts Cataloy Knifing Putty is a durable and easy to use primer which provides a solution to exterior surface damage such as chips and scratches. It fills in surface scratches and chips to create a perfectly smooth finish which is ideal for painting.
Holts Cataloy Knifing Putty Extra Info
- Suitable for all cars
- Easy to use filler
- Provides a smooth surface on your car’s exterior
- Comes with applicator included
Holts Cataloy Knifing Putty 100g is rated out of 5 by 21.Rated 1 out of 5 by eringo99 from Horrid stuff - will ruin everything ! Nasty stuff, should not be on the shelf, goes on horribly sticky and goes all gummy, took off my aged primer and had to redo everything all over again, had to go back to metal and remove my cured filler too. Only bought it to fill pinholes over filler, should have just used filler - you live and learn, YOU have been warned, should have read the reviews!!!Date published: 2017-09-23Rated 2 out of 5 by Lotfi2013 from Too sticky it wasn't smooth at all, hated working with it, you have to get it right with one sweep or else it loses its smoothness.Date published: 2017-08-21Rated 1 out of 5 by Laundosh from Knifing putty Not good, setting time actually days,even then soft and not sandableDate published: 2017-06-18Rated 3 out of 5 by Renfield from Disappointing Not easy to get a good finish; too sticky and seemed to need more solvent to make it smooth. Used cellulose thinners to smooth the surface. Perhaps it was a bad batch.Date published: 2017-06-17Rated 5 out of 5 by matt37 from Used on 3D printed models I use this on 3D printed models to smooth out the build lines. I print in PLA and the putty has excellent adherence to it. As long as you don't build it up too thick it will dry and be sandable in about 30mins to an hour. I find it responds well to coarse sanding sponges for rounded and curved shapes and then through the grits to smooth out. If its left to dry properly it will sand very easily. It takes paint very well and helps give a nice smooth finish. It s no use for building up a deep level or sculpting in a shape. Use P38 or similar for that.Date published: 2017-05-20Rated 5 out of 5 by MJ64 from Easy to use Excellent product, easy to use and gave great results.Date published: 2016-09-14Rated 5 out of 5 by richarddick from Great service I used this putty on my model boat and worked well lot cheaper at Halfords than on lineDate published: 2016-07-07Rated 2 out of 5 by Podmeister from Holts Cataloy Putty I have to say it was terrible, it says dries in 30 minutes, well it doesn't, you can see from other's here that they leave it over night. it's too thick so doesn't spread well either. Waste of moneyDate published: 2016-07-04
You can buy this product from one of our carefully selected Approved Partners. The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready.
You can purchase products supplied by Halfords and selected other suppliers on halfords.com.
Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.Showing 1 - X of our buying options
Price Seller Info Purchase