- Help & Advice
- Buying Options
U-POL Extra Polyester Filler 2.1 Litre
The U-POL Extra Polyester Filler is a two-component multi-function paste used for the filling of small holes & imperfections in most substrates.
It has been specially formulated for the professional user and combines good filling and smooth spreading properties together with ease of sanding. This U-POL filler is suitable for the following surfaces: steel, aluminium, zinc coated substrates (degrease and abrade with P80 paper), original paint surfaces (with the exception of thermoplastics) degrease and abrade with P180 and on GRP, degrease and abrade with P80 paper.
U-POL Extra Polyester Filler 2.1 Litre Extra Info
- Two-component multi-function paste used for the filling of small holes & imperfections
- Suitable for use with most substrates
- Sandable after 20 minutes (at 20C)
- Can be over-painted with most paint systems including 2K
- 2.1 litre tin
Rated 4.8 out of 5 by 5 reviewers.Rated 5 out of 5 by SoloJoe Best filler I've ever used!!! This stuff is amazing. I've used hundreds of fillers and none of them come close to this stuff. It's easy to mix, goes on smooth, cures in minutes, you have to do small batches and be quick, it sands fantastically well and takes paint beautifully. Its also flexible when dry so panel movement doesn't crack it. 14 May 2016Rated 4 out of 5 by skoda1999 Hugh Jones Does what is says on the tin.what more can one say 25 September 2015Rated 5 out of 5 by drsomani U-POL Extra Polyester Filler 2.1 Litre We brought this product to use on our van and without hesitation, I recommend the product. It's easy to use as does not dry too quickly and allows one to mould the filler properly and it was fairly easy to sand... a good value. 22 September 2015Rated 5 out of 5 by Electriceel Not Just for filling car bodywork I've used this filler paste for loads of different things over the years. Basically it's a top quality Polyester filler. Sticks to most things. Easy to work with. Add more setting agent to make it go off faster, but not too much as it will then start hardening within a minute of so. Able to shape with a sharp knife when it's started to set and is the consistancy of a soft cheese. You can use a flat blade at 90 degrees when it reaches the consistancy of a hard cheese to scrape/shave off the surface and get a great flat surface, then a light sanding to finish off. It's not just for cars! Makes a great filler for permanant repair to the crumbled edges of sandstone detailing used on many Victorian properties...Sticks "like you know what!" Used it to make an exact copy of an old wooden moulding,(using a plaster of paris mould) it even had the original wood grain marks on the finished item! I've always got a tin in my shed for DIY purposes. Can be thinned down with glass fibre resin if required. Buy a big tin, you'll regret it if you don't. 18 August 2012Rated 5 out of 5 by Gergargill Good product, dose what it says Good product, but minimal instructions on the tin. 06 February 20121-5 of 5
You can buy this product from one of our carefully selected Approved Partners. The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready.
You can purchase products supplied by Halfords and selected other suppliers on halfords.com.
Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.Showing 1 - X of our buying options
Price Seller Info Purchase