- Help & Advice
- Buying Options
HAMMERITE No1 RUSTBEATER GREY 250ML
The HAMMERITE No1 RUSTBEATER GREY 250ML is perfect for areas where there is a build-up of rust. It’s corrosion resistant and is compatible with most topcoats. It can be applied directly to rust and can help to prevent further rust from developing. It also contains an anti-corrosive primer for ferrous metals. Preparation: Remove loose rust, scale and paint by wire brushing or rubbing down with coarse abrasive paper. Abrade clean steel with emery paper to provide a key. Degrease where necessary with white spirit, rinse with clean water and allow time to dry. How to use: Ideal application temperature is 8 to 25degC. Stir paint thoroughly before use. By brush: apply 2 coats, allowing 6 hours between coats. Ensure corners and edges are well covered. Apply topcoat after 6 hours. By roller: apply 2 thick coats. Thin with Hammerite Brush Cleaner & Thinners at 9 parts paint to 1 part thinners. Brush in edges first before using roller. A suitable Hammerite topcoat/paint system must be applied after a minimum of 6 hours. For best results allow 24 hours.
HAMMERITE No1 RUSTBEATER GREY 250ML Extra Info
- Can be applied directly to rust
- Can help prevent further rust from developing
Rated 5 out of 5 by 1 reviewer.Rated 5 out of 5 by fayer Hammerite Rust Beater This seems a very good product. It was very easy to apply and two coats seemed to provide a very good base for the top coat. 20 August 20161-1 of 1
You can buy this product from one of our carefully selected Approved Partners. The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready.
You can purchase products supplied by Halfords and selected other suppliers on halfords.com.
Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.Showing 1 - X of our buying options
Price Seller Info Purchase