- Help & Advice
- Buying Options
Halfords Very High Temperature Spray Paints
We have a wide range of Halfords Very High Temperature spray paints for sale, all giving the professional results you expect. Halfords Very High Temperature paint is specially formulated to withstand temperatures of up to 500░C.
Features and Benefits
- Durable corrosion-protecting matt finish
- Enhances appearance of high temperature areas of engines
- Ideal for use on exhaust manifolds
- Ideal for use on many areas of air-cooled engines
Warnings!Please click here for Health and Safety information.
Rated 3.8 out of 5┬áby 5 reviewers.Rated 5 out of 5┬áby Cb175 Good product Used this on my motorcycle exhaust. Prepped exhaust with a scotch pad, cleaned with meths and applied two coats. When heated for the first time it took around 16 minutes to stop smoking and at that point I assumed it had cured, so went for a half hour ride to really get things hot. Very pleased with the results 18 October 2014Rated 1 out of 5┬áby Fubi Motor bike exhaust paint I tried this on two exhaust down pipes. Prepared the metal rubbed down with sand paper then de greased then used a derusting metal perpetration solution . Cleaned and dried then sprayed three Coates 15 mins in between, the work shop is heated so done at around 15 deg c and dry weather, put into an oven for around a hour and a half after drying for an hour. The paint comes off with my finger nail. So what did I do wrong, is it the metal it might be stainless steel but was rusty. 25 February 2014Rated 4 out of 5┬áby fieldie heat paint Remove surface rust then spray this to tidy up exhaust heat shields, exhaust manifolds or inlet manifolds if alloy. My engine bay looks a lot tidier after using. 03 June 2013Rated 4 out of 5┬áby Tookyboy Good paint Good product as I wanted would buy the product again 09 May 2013Rated 5 out of 5┬áby Verified Reviewer Halfords Very High Temperature Paint Metallic Blac Basically got this for my refurbed F/R brake calipers, knuckles and stub axles. I went for the Metallic Black which leaves a Matt finish as I don't like the glossy finish look for cast items, it went on really easy and dried really quickly also. I suppose it would look good on other items with a Gloss Clear Coat, but that's down to choice and not for me with what I was doing, as in my opinion it looks more OEM than after market. This may sound like a strange Tip of the Day, but once it has dried for an hour or so, put it into a cold oven on the bottom/middle shelf and turn it on to a heat setting of 100┬░C and let it bake for approximately an hour. This will harden the paint and adhere it to the surface better (As long as you have applied it to a correctly prepared surface) 15 April 20111-5 of 5
You can buy this product from one of our carefully selected Approved Partners. The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready.
You can purchase products supplied by Halfords and selected other suppliers on halfords.com.
Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.Showing 1 - X of our buying options
Price Seller Info Purchase