Fitting Bike Chains
Checklist for fitting a bike chain
- bike lube
- a cloth or rag
- you might need a chain tool for some bikes
- if you need a chain tool, you'll also need pliers
- this one's optional, but a bike workstand makes the job even easier
Get the right-sized chain
The main thing with bike chains is that they need to fit your bike. Here are some tips on getting the right one:
- measure your new chain against your old one.
- new bike chains come with extra links for bikes with bigger sprockets and chain-rings.
- you should be able to see how big your chain needs to be by threading the chain tightly around the largest chain-ring and sprocket, and through the rear gear mechanism.
- for Shimano gear mechanisms - put your bike in the highest gear when you're fitting the new chain, so that the rear derailleur jockey wheel cage is pointing straight down to the ground.
- for SRAM gear mechanisms - add two extra links and, if your bike has loads of gears, you may need to add up to four links.
Master links and chain tools
Most new chains come with a master link that makes fitting it on your bike really easy. With a master link, you can join two ends of the chain together once it's already in place on your bike.
If your chain doesn't have a master link, make sure you buy one because they'll save you loads of time!
The alternative is using a chain too which is a lot trickier, especially if you've never used one before.
Shimano bike chains
Shimano bike chains are a little bit different. They have a special pin which should be pushed through the chain link with a Shimano chain tool, until a groove appears.
The bit of the pin that sticks out can then be broken off.
Fitting bike chains at Halfords
Feel free to pop in to your local Halfords for any advice. We can also fit any chain for you; it won't cost you much at all and you'll have peace of mind that it's been done correctly and you're safe to cycle.