Added to your basketX

There are no items in your basket
Subtotal
£0.00
Basket Total
£0.00
Checkout

Ring Fast-Fit Kit

Add to Wish List
Ring Fast-Fit Kit4.2510

Item: 633479

How can I get it?

FREE Click & Collect
  • Description
    • Ring Fast-Fit Kit

      The Ring Fast-Fit Kit can be used with most 12V lights and to wire a pair of fog or driving lamps. The kit includes switch, bracket, screws and connector. Everything you need to wire lamps.

      Ring Fast-Fit Kit Extra Info

      • 30amp fused relay with pre-wired loom.
      • Ideal for installing extra 12V vehicle lighting.
      • Includes switch, bracket, screws and connector: all you need to wire lamps.
      • Suitable for most 12V, 55W lamps.
         
  • Delivery Options
    • Next Day Delivery FREE next day delivery on all orders over £40 (Halfords products only) £3.99
  • Reviews
    • Ring Fast-Fit Kit is rated 4.2 out of 5 by 10.
      Rated 3 out of 5 by from Good but...... Easy install, just make sure that all the wiring is connected to the correct relay terminals - the kit I bought was not wired as per the supplied wiring diagram.
      Date published: 2016-06-17
      Rated 5 out of 5 by from spot light wiring kit ordered on line to be collected, phone call to say I could collect in less than an hour. and the kit was exactly as described easy peasy. all together a very satisfactory transaction. well done Halfords Netherfield Nottingham
      Date published: 2016-05-20
      Rated 4 out of 5 by from simple to fit only problem 2 wires are to short the double lead to the spot light and the blue lead to interior switch
      Date published: 2015-01-21
      Rated 5 out of 5 by from Spot Light wiring kit Superb, easy to use with good instructions...just what I was looking for! BMW Mini wanted hundreds to wire my spots to my mini but i did it myself with minimum knowledge of modern cars. The wires are colour coded and already attached to the relay so its hard to go wrong. Theres plenty of length too. I didn't need any specialist tools and the job took me about 2 hours (mainly due to the fact that I didn't know which wire was the high beam one). You will need a voltage meter unless you know the wiring of your car but apart from that just the usual pliers, cutters etc. Thoroughly recommended. I would give this job a difficulty rating of 2 out of 5.
      Date published: 2015-01-01
      Rated 5 out of 5 by from great product great product with the fitting kit.. so easy to use and fit
      Date published: 2014-12-14
      Rated 5 out of 5 by from The kit Did the job very wellç was just wot I needed and good quality
      Date published: 2014-11-08
      Rated 4 out of 5 by from Good accessory wiring kit. Has all the stuff required to fit a set of lamps or other accessory. However could do with a few more connectors. Easy to fit, the relay is already connected, easy to follow instructions if needed. Overall good easy to use product though little pricy for wot it comes with.
      Date published: 2013-05-19
      Rated 1 out of 5 by from This product is (nearly) useless for Land Rover Defenders I was given some driving lights to fit to my Land Rover 90/Defender and needed the wiring to install them. This kit is advertised as a 'fast fit' with everything you need. Most of the kit is pre-wired with connectors and it comes with the necessary relay. To me the 'fast fit' description is a little misleading - the only time saved is really not having to crimp the various connectors/terminals - you may have to do this anyway to either extend cable runs or shorten surplus cable on very small cars (unless you have somewhere suitable to stuff spare wiring). The contents of this kit will not be sufficient to install driving lights on the front of a Defender (or probably anywhere else). The very short earth wires with tiny 'ring' type terminals are pretty useless (went in the bin). The'ring' type terminal on the fused live feed from the battery is only good for smaller battery bolts (the one on the battery clamp) - useless for the heavy duty battery fitted to a Land Rover 90 (had to fit larger terminals). The length of wiring supplied is far from generous and certainly not sufficient for any vehicle where the battery is not fitted under the bonnet (as with a Land Rover Defender). I needed to buy at least 3m of additional cable(s) to route the necessary feeds to both the light switch and the relay. The kit included the connector to tap into the main beam feed - one of those 'press in' jobs - this went in the bin in favour of some 'proper sized' bullet connectors. The illuminated light switch and mounting appeared flimsy and looked rather 'naff' - even on standard vehicles I can't imagine any self respecting 'boy racer' screwing the switch supplied to their dashboard (went in the bin). On a final note, unless you have eyes like a 'galley rat' be prepared to dig out the magnifying glass to read the instructions. In summary, this kit is designed for 'smaller' vehicles. Even then be prepared to modify terminals and probably buy a suitable dashboard switch that you can conveniently route the wiring to. If you happen to own a defender (or similar) - just forget it - measure up for required cable and buy the other components as necessary.
      Date published: 2013-01-04
      • y_2017, m_10, d_18, h_18
      • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
      • cp_1, bvpage1
      • co_hasreviews, tv_0, tr_10
      • loc_, sid_633479, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
      • clientName_halfords
  • Help & Chat
    • Live Chat

  • Free Click and Collect - available in 1 hour
  • Free Next Day Delivery - on orders over 40
  • Easy Returns - Free to any store