image of Laser Ball Joint Separator Scissors

Item: 694406

Laser Ball Joint Separator Scissors

£21.99

How can I get it?

FREE Click & Collect

  • Description
  • Reviews
  • Delivery Options
  • Help & Advice
  • Buying Options
  • Laser Ball Joint Separator Scissors

    Made from carbon steel, the Laser Ball Joint Separator Scissors is the ideal tool for removing ball pin from housing on steering arms.

    Laser Ball Joint Separator Scissors Extra Info

    • Manufactured from carbon steel
    • Useful for removing ball pin from housing on steering arms
  • Rated 2.7 out of 5 by 7 reviewers.
    Rated 1 out of 5 by Laser Ball joint separator did not manage to open to 50mm without removing some of the back lower jaw! Then finally tried it the screw de threaded most disappointing! 10 December 2015
    Rated 5 out of 5 by Very handy tool! Used these to replace the entire steering on a 4x4. Altogether I had to seperate 6 ball joints, and this tool did the job no problem. Seems well made, so should last quite a while. Overall very happy with it, and would def recommend! 17 August 2015
    Rated 1 out of 5 by Useless Tool - poorly constructed Extremely poorly made tool. The length of the arm that is supposed to push down on the ball joint pin is far too short to make decent contact with the pin (even with a nut left on the pin). Conversely, the arm that the screw makes contact with is too long, meaning the jaws don't open wide enough to fit easily over the pin. Lastly, the centre pivot is far too loose allowing too much twisting motion that the screw doesn't hit squarely down on the arm. Pretty much only useful as a paper weight. 15 July 2015
    Rated 1 out of 5 by A one use tool that could barely do half the job I brought this as I was working on my vehicle and didn't like the idea of using a big lump hammer and splitter close to the brake discs. This managed to remove one of the tie rod ends eventually but when I tried to use it for a second tie rod end the tool began to fall apart! The nut will not stay on the scissor part of the splitter and the lower "prongs" have started to bend! Leaving me with a stuck tie rod end! 27 January 2015
    Rated 5 out of 5 by Does what it's meant to do This separator did what it was meant to do, which is all you can ask. Can't fault it. 24 February 2013
    Rated 3 out of 5 by Okay Value for Money Product as described. It can damage the rubber around ball joint. 17 December 2012
    Rated 3 out of 5 by not great I've used this ball joint separator to split 6 joints on a 1994 mx5 and the last two were extremely troublesome. The tool seems to have bent out of shape under the pressures required to separate the first four joints! Also screw has dug a path for itself in the metal to basically slip off the upper arm, probably.due to the amount of play in the separator.hinge. The screw is also not very long, in addition to having bent out of shape a little I now have to wedge an extra lump of steel (i used an old spanner handle) between the upper arm and the ball joint bolt to get the leverage required. So, all in all, I'm not very impressed with this tool, but there are. few alternatives out there. 24 November 2012
    • 2016-08-28 T07:07:14.322-05:00
    • bvseo_lps, prod_bvrr, vn_prr_5.6
    • cp-1, bvpage1
    • co_hasreviews, tv_7, tr_7
    • loc_en_US, sid_694406, prod, sort_default
    1-7 of 7
    • Standard Delivery
      £2.99

      FREE within 4 working days on all orders over £30 (Halfords products only)

    • Next Day Delivery
      £4.99

      Order by 8pm for delivery tomorrow (Mon - Fri)

    • Named Day Delivery
      £4.99

      Choose your delivery day (Mon - Fri)

    • Saturday Delivery
      £5.99

      Order by 8pm Friday for delivery on Saturday

    • Sunday Delivery
      £5.99

      Order by 8pm Friday for delivery on Sunday

    • Morning Delivery
      £6.99

      Order by 8pm for delivery 8am - 12 midday (Mon - Fri)

    • Afternoon Delivery
      £6.99

      Order by 8pm for delivery
      12 midday - 6pm (Mon - Fri)

    • Evening Delivery
      £9.99

      Order by 8pm for delivery 6pm - 9pm (Mon - Fri)

  • You can buy this product from one of our carefully selected Approved Partners. The full list of options available are below. Simply add your chosen option to your basket and proceed to checkout when you're ready.

    You can purchase products supplied by Halfords and selected other suppliers on halfords.com.

    Checkout is always via halfords.com and all payment will be taken via halfords.com. In checkout the products will be split into separate deliveries for each supplier.

    Showing 1 - X of our buying options
    Price Seller Info Purchase

Some of the parts we sell here at Halfords have been reconditioned. These will carry a Refundable Deposit or an extra surcharge amount. When you add one of these reconditioned items to your basket, we'll add this extra cost automatically.

Once you've sent us your old item we'll check it over, and then refund you the full surcharge as long as everything is ok.

Before you return your old unit please make sure it's in re-serviceable condition. So if you're returning caliper casings, you'll need to double check they aren't badly damaged or broken. If the part you've sent is found to be unserviceable, we reserve the right not to refund the surcharge.

Please note that if you're returning your old unit to our National Returns Centre then this will be at your own expense.

Live Chat

Help and Chat

We're sorry – all our advisors are a bit tied up at the moment!

To contact us by phone or email click the button below to get in touch.

Contact Us

We're available to chat 7 days a week:

Live Chat Opening Hours:

  • Monday Friday

    08:00 22:00
  • Saturday

    08:00 22:00
  • Sunday

    08:00 22:00
  • Bank Holidays

    08:00 22:00
Laser Hand Tools

Laser Ball Joint Separator Scissors

£21.99 The Laser Ball Joint Separator Scissors are made from a strong and durable carbon steel.