Halfords Ford 'Frozen White' Scratch & Chip Repair Kit
The Halfords Ford 'Frozen White' scratch & chip repair kit is compatible to Ford manufacturer's code: 5, F, H, W & 7VTA.
The touch up paint is the ideal way to repair small unsightly scratches and stone chips on your car's bodywork, blending them in with an exact colour match.
Simply use the special glass fibre prep tool to remove any loose/flaking paint and all rust from the chip or scratch. Then apply the high build primer filler using the precision nib applicator or brush into the prepared rust free chips and scratches, building up the thickness in stages (leaving 10-20 minutes between coats) leaving 24 hours to harden.
Lightly rub down using abrasive side of special tool to achieve smooth finish, then apply your colour match using the precision nib applicator or brush to the prepared and primed chips or scratches. Build up the colour in stages by leaving 10-20 minutes between each coat*. Leave the paint for 24 hours to harden then simply buff the surface using fabric side of special tool to blend in the repair.
Halfords Ford 'Frozen White' Scratch & Chip Repair Kit Extra Info
- 2 x 12.5ml pen set
- Ford manufacturer's code: 5, F, H, W & 7VTA
- Compatible with the C-Max, Fiesta, Focus, Fusion, Galaxy, Ka, Kuga, Mondeo, S-Max, Transit Connect & Tourneo from 2006 onwards
NB. Always test on an inconspicuous area.
* For metallic or pearlescent finishes allow your colour match paint 24 hours to harden before applying the Clear Protection Lacquer in stages allowing 10 minutes between each coat
To find the manufacturer's colour code, look for the identification plate. In most cases this will be under the bonnet, in the boot or inside the driver's side door frame.
Type: Chip & Scratch Repair Kits Vehicle Make: Ford Manufacturers Code: 5, F, H, W & 7VTA