Halfords Advanced Tubeless Track Pump

Halfords Advanced Tubeless Track Pump

Tubeless Tank

The Halfords Advanced Tubeless Track Pump offers an all-in-one solution for inflating tyres and seating even the most stubborn tubeless setups. It features a secondary air chamber that can be pressurised up to 240 PSI, allowing you to release a powerful burst of air at the flick of a lever-helping the tyre bead snap securely into place on the rim. The lever, conveniently located on the pump head, lets you easily switch between "Tire" and "Tank" modes.

Easy To Use Lever

The spring-loaded lever allows for easy, one-handed locking onto both Presta and Schrader valves, making it perfect for quick inflation-whether at home or in the workshop. With a simple press of the lever release button, the head detaches smoothly, minimizing air loss and reducing the risk of damaging the valve stem when disconnecting.

Aluminium Body

The pump body is constructed from aluminium, making it both strong and lightweight. This combination makes it an ideal choice for home mechanics or for stowing in your car for the next MTB trip, with no concerns about damage.

Extra-Long Hose

We-ve equipped this pump with an extra-long hose to provide enhanced reach, making it easier and more comfortable to inflate tyres when your bike is in a workstand. The added length not only ensures flexibility and convenience but also allows for better manoeuvrability, reducing strain on your back and making it easier to access valves at awkward angles. Perfect for both home mechanics and on-the-go use.

Dial

The large dial, conveniently mounted at the top of the pump, makes it easy to monitor your pressure as it reaches the desired PSI. It scales all the way up to 240 PSI, clearly indicating when the air chamber is full. Be sure to check your bike's tyre specifications to ensure you're inflating to the manufacturer-s recommended pressure.

How To Use

• Remove the valve cap from the valve and for presta valves, unscrew the end of the valve core as far as possible.

• Ensure the lever on the pump head is released and then press firmly onto the valve and pull the lever shut to lock.

• On the lever head, turn the smaller lever to either tyre or tank depending on whether you want to inflate the tyre as normal or require a quick blast of air to seat a tubeless tyre.

For Tyre Filling:

• After fitting the head of the pump to the valve start inflating as normal. Make sure to inflate your tyre to the recommended pressure as stated on the sidewall of your tyre.

For Tubeless:

• Start pumping to increase the pressure within the tank.

• Once the tank has reached its max pressure, release the air by turning the valve on the head of the pump from tank to tyre.

• Assuming the tyre has locked into place, start pumping as normal until you reach the desired pressure.