Halfords 10L AdBlue

Halfords AdBlue 10L

• Lower particulate emissions

• Filling nozzle can be screwed to the top of the can to allow easy pouring and emptying of AdBlue

• Once emptied, can is fully recyclable

• Suitable for all vehicles fitted with SCR systems

• Separate filling nozzle is included and is located under the back label of the can

• ISO 22241

Features:

The Halfords Adblue 10L for diesel engines with SCR technology (Selective Catalytic Reduction) comes in a convenient bottle with easy pour spout to reduce the risk of spillages.

Most passenger vehicles will have AdBlue tanks ranging from 10 - 15 litre in capacity so the 10L can of AdBlue provides a good quantity refill.

Adblue Top-Up - opens in a new tab also available

Directions for use:

• Remove spout from behind the label and securely screw onto the bottle neck.

• Locate AdBlue® tank - DO NOT ADD TO NORMAL FUEL TANK. Remove AdBlue® tank cap and insert spout into AdBlue® tank.

• Top up AdBlue® one litre at a time until the tank is full. Secure the cap back onto the vehicle's AdBlue® tank.

• Store any unused AdBlue® in the original bottle out of direct sunlight and tighten the cap fully. Ensure the spout is completely clean and dry before re-using.

• If AdBlue® comes into contact with the vehicle's paintwork, wipe off and rinse the area with water if necessary.

WARNING!

DO NOT ADD TO FUEL TANK

Keep out of reach of children. Product should be kept between -5?C and 30?C. In event of freezing slowly heat up for continued use. This product must be stored out of direct sunlight. To prevent leakage, keep container upright with lid on tight when not in use.