Einhell 80 Piece Handtool Set In E-Case

Einhell 80 Piece Handtool Set In E-Case

The 80-Piece Handtool tool case from Einhell is ideal for everyday jobs in the workshop and around the home. Be it fixing cupboards, adjusting doors, repairing toys and bicycles or maintenance work on cars and motorbikes.

The tool box is compatible with the Einhell E-Case system and has a locking system for connecting stacked tool boxes. Folding hinges ensure that the tool box can be opened and closed easily, even when stacked. The E-CASE can also be protected against theft with a standard padlock. Two retractable, ergonomically shaped handles make it comfortable to carry.

A wide range of tools provides a comprehensive set of basic equipment.

The tool case contents include:

• 300 g TÜV-certified locksmith's hammer

• 160 mm long combination pliers for gripping and bending tasks

• 250 mm long water pump pliers for pipe and assembly work

• Six different screwdrivers:

• PH2 x 100

• SL5,5 x 100

• T20 x 100

• T25 x 100 mm

• PH2 x 38 mm

• SL5,5 x 38 mm

• TÜV-certified phase tester for voltages between 200-250 volts

While the hexagon socket spanner set in the sizes:

1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm

Ideal for hexagon socket screws, 18 bits in 25 mm provide for all common screw profiles such as:

• Phillips

• Pozidriv

• Torx

• Hex

The tool case set also contains:

• Nine socket spanners with a width across flats of 6 / 8 / 10 / 11 / 12 / 13 / 15 / 17 / 19 mm for hexagon bolts and nuts

• Snap-off blade knife with ten spare blades in 18 mm

• Nine combination spanners in sizes 6 / 7 / 8 / 11 / 12 / 14 / 15 / 16 / 19 mm

• Three ring ratchet spanners in 10 / 13 / 17 mm for tight connections

The selection is complemented by:

• A reversible ratchet with clockwise and anti-clockwise rotation, 3/8" drive, 72 teeth and a release button for sockets

• A 3 m long rolling tape measure for precise measurements

• A 16 mm diameter spark plug socket for maintenance work on cars

• Three-way adapter, three socket spanner adapters and the sliding piece for extension with a 13 mm hole, extending the range of applications by allowing it to be combined with other tools

The tools in the system case are safely stored in a two-colour EVA® foam inlay with a carbon look. The two inlays provide sufficient space for all tools, enable scratch-free transport and keep the inside of the case organised. The inlays can be easily removed and replaced thanks to indentations on the sides. This means that the tool kit can be stored flexibly on the workbench or at the workplace and the required tools are quickly to hand.

The 80-piece tool case made of high-quality polypropylene is heat-resistant, splash-proof, impact-resistant and ideally suited for mobile use thanks to its robustness.