All footage is stored onto the MicroSD card used for your front facing Nextbase Dash Cam.
The Nextbase Rear Window Add-on Camera focuses on the road behind you to guard against tailgates and rear impacts. It connects to your rear windscreen via a wired 6.5m cable connection to your existing Series 2 Dash Cam. It uses an easy to install self-adhesive pad, which can be installed in any vehicle's rear window. The magnetic adjustable mounting fixture means that it is suitable for angled windows in cars, or vertical van windows. It uses a wide angle 140° viewing angle and will save footage onto the MicroSD Card in your front Dash Cam.
Nextbase Rear Window Add-on Camera Extra Info
The Nextbase Rear Window Add-on Camera is compatible with the following Dash Cam models (Resolution - front camera dependent)
622GW - when connected this will continue to record in 4K, with the add on camera recording in 1080p Full HD.
422GW/522GW - when connected these will record at 1080p/30fps with the Add-On Camera recording at 1080p.
322GW - when connected this will record at 1080p/30fps with the Add-On Camera recording at 720p.
What's in the box
Nextbase Rear Window Add-on Camera
Instructions
How does the Rear Window Add-on Camera plug into the front camera?
The Rear Window Camera uses a 6.5 metre cable (included) to connect the rear camera on the rear windscreen to the front camera on the front windscreen. This cable can be neatly tucked underneath your car’s trim to hide any cabling from view.
The front and rear cameras then record simultaneously, and both sets of footage are stored as separate clips on the front camera’s SD card.
What view will I see using the Rear Window Add-on Camera?
The Rear Window Add-on Camera mount uses an adhesive pad to stick to your rear windscreen. The camera itself then attaches to the mount using a magnet. The camera looks out through your rear windscreen and shows the scene directly behind your car and beyond.
Which front camera can I use the Rear Window Add-on Camera with?
The Rear Window Add-on Camera is compatible with the Nextbase 322GW, 422GW, 522GW and 622GW front cameras. It’s not compatible with the 122 or 222.
Is the Rear Window Add-on Camera suitable for use in my car?
The Rear Window Add-on Camera cable is 6.5 metres long and the camera mount attaches directly onto the rear windscreen of the vehicle. It’s therefore suitable for vehicles that have glass rear windscreens and a total length of less than 6.5 metres from front to rear.
The camera is unsuitable for panelled vans without rear windscreens, vehicles with a total cabling length from front to rear of more than 6.5 metres (including fitting around the vehicle trims), vehicles with vertical rear windows or convertible vehicles without a rear window.
Can I use this camera without a front camera?
The Rear Window Add-on Camera can’t be used as a standalone rear camera and will only work with a compatible Nextbase front camera.
Can multiple rear cameras be used with one front camera?
As Nextbase front cameras only have one rear camera port, only one rear camera can be used at any one time.
