RRP ProGuard Front Mudguard

RRP ProGuard Front Mudguard

• Indent for fork brace giving extra 4mm of tyre clearance.

• 24 crown holes that offer a massive number of fit options.

• Snap-off hole covers reduce spray from travelling through unused holes.

• Long front to cope with high-speed spray.

• Smaller turn down at front for better tyre clearance and to reduce blockages.

• Rear flick offers even more protection when the wheel is turned.

• Sticker recess offers greater protection for sticker adhesive.

• Seal protection increased with our acclaimed seal shield design.

The ProGuard is our amazing new front mudguard developed for disc brake mountain bikes offering unmatched protection from mud and spray, it's perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. Our design intent was to increase the tyre clearance, improve fit, and reduce the mud clogging issues seen with this type of mudguard. The Mini offers a very compact design for all year-round protection, The Standard offers superb protection in a shorter more compact design, whereas the longer Max Protection version offers incredible unmatched levels of protection.

Indent:

A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection, so a compromise is needed.

Front:

The front has been made longer than some of the offerings out there as we see this is an area that can significantly improve the protection of the face and eyes when riding at high speed. Our turn down at the front deflects the spray downwards without clogging with mud which causes blockages.

Snap Off Holes:

We have added hole covers that reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the cable tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit.

Rear Flick:

The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned

Sticker Recess:

The recess down the centre is a nice easy reference to apply our coloured stickers to, but it has a more important job, this recess prevents the sticker having to sit proud on the surface of the guard making it vulnerable to durability and jet wash issues. The supertack glue used on our stickers is strong, although it's fair to say that no sticker can withstand a sustained attack from a powerful jet wash, although the recess does prevent a direct hit.

Seal Shield:

Our widely acclaimed Seal Shield has made it to the Proguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Shield section also provides additional strength and rigidity to the rear reducing flex.

Max Protection version:

We offer the longer Max Protection version to be the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection.

Material:

We decided to make our mudguard material slightly thicker than some offerings which together with our unique polypropylene mix gives great flexibility, durability and strength.

Zip Ties:

6 cable ties are provided with each mudguard, the holes on the side arms are mandatory requiring 4 leaving the other 2 for the fork brace (although more could be added if desired).

Technical specifications:

• Length: 386mm - Mini; 494mm - Standard; 582mm - Max Protection.

• Weight: 85g - Mini; 119g - Standard; 133g - Max Protection (weight does not include cable ties).

• Compatible wheel sizes: 26", 27.5", 29".

• Maximum tyre width: up to 3" tyre.

• Compatible forks: Most forks including Boost forks (except reverse arch).