Park Tool SG-8 Saw Guide For Carbon Cutting Blades

Park Tool SG-8 Saw Guide For Carbon Cutting Blades

• Cut any threadless fork steerer quickly and accurately with this handy saw guide

• Slotted especially for thicker carbon cutting blades, which do not fit in standard cutting guides

• You can easily remove as little as 1mm from the carbon steerer length for perfect headset installation and adjustment

• Heat treated for long life

• The composite body will not damage the fork's steerer, but has steel threads and inserts to withstand heavy shop use

• Suitable for all unthreaded steerer tubes up to 1-1/4"

• Made in the USA and covered by Park Tool's legendary limited lifetime warranty

Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a straight, clean cut on steering columns, handlebars, seatposts, or any other round tube from 22 mm to 33 mm in diameter. Simply clamp the SG-8 onto the tube and cut, letting the SG-8 guide the hacksaw blade. The SG-8's non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.

Features:

• Compatible with any round tube from 22 mm to 33 mm (0.87" to 1.3") in diameter

• Compatible with 1", 1 1/8" and 1 1/4" steering columns

• Accommodates blades up to 2.5 mm (3/32") wide

*NOTE: SG-8 is intended for use with a carbon-specific hacksaw blade. When using a steel blade, use the SG-6 Saw Guide.