Simply Fade In Sun Strip - Blue Top Tint

Approximate size: 120cm (48in) wide x 10cm (4in) deep

Blue top tint; fades from solid blue at the top to clear at the bottom

Thoroughly clean the inside of the windscreen using methylated spirit. Although the strip can be applied dry, it is recommended to wet the surface of the screen with water containing a small amount of washing up liquid. Spray or sponge this solution to the top of the windscreen. If mounting the strip on a front windscreen which has a screen mounted rear view mirror, cut an appropriate sized hole in the strip. Remove the backing paper from the Sun Strip. Place the strip on the top of the screen and ensure that the side against the glass is the one which was against the backing paper. Draw a rubber squeegee or clean cloth across the strip from the centre to each end, forcing out air bubbles and any excess water. Trim and cut off all except 2.5cm (1") of the surplus length at each end with a sharp knife, but trim to a perfect fit about 24 hours after fitting (there may be slight shrinkage).