Park Tool AP-1 Adhesive Primer

Park Tool AP-1 Adhesive Primer

• Prepares surfaces and accelerates curing

• Promotes maximum performance of Park Tool TLR-1 and TLR-2 Thread Lockers as well as RC-1 Retaining Compound

• Must be used on all component, fastener and carbon fibre surfaces in conjunction with threadlockers and retaining compounds that contact carbon fibre such as PF30 bottom brackets or bearings pressed into carbon fibre frames. Failure to do so could result in permanently bonded parts

AP-1 Adhesive Primer prepares surfaces, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Conveniently contained in a pen for easy and precise application.

• 10 ml pen

• Competes with Loctite® 7649™

*NOTICE: When retaining compound or threadlocker is used on carbon fiber frames or components, adhesive primer must first be applied to all component, fastener and frame surfaces. Failure to do so could result in permanently bonded parts.

*CAUTION: Some painted surfaces can be sensitive to threadlockers, retaining compounds and primers. Test first on an inconspicuous area to see if it causes a stain or discoloration. Clean off any excess from painted surfaces immediately."