Mavic Deemax Enduro SL 27.5" 6 Bolt Rear Wheel

ISM4D construction allows to reduce the rim’s weight without impacting the strength.
ID360 ratchet-equipped hub will be your best ally during fast pedalling sections.
Welded 30mm width rim offers more control and comfort.
Patented Fore technology and Infinity hub allow to replace a broken spoke quickly during stage linkage, without removing the tyre or tubeless tape.
Tubeless compatibility without any tape (Fore technology) and wider central channel allow an easy tyre swap and ensure perfect and durable sealing.
Tested and approved by our most demanding pilots.
Wider welded rim (30mm width) is designed to absorb heavy impacts.
Wide rim shape to facilitate DH casing tyre between 2.0’’ and 3.0’’ set-up, which allows pilots to choose their favourite set-up.
The double rims surface protection (Blackshield) preserves the aesthetic condition of the rim against stones impacts.
Shimano Micro Spline or SRAM XD freehub options (conversion kit for Shimano HG available separately).
6-bolt rotor interface for compatibility with 6-bolt disc rotors.
Available with boost (12x148mm) thru axle spacing (adapters can be purchased separately for boost quick release rear conversion).
Weight rear: 990g.

We designed the Deemax Enduro SL 27.5 specifically to meet the demands of the Enduro World Series stages and to satisfy the most adventurous mountain bikers. Also available in mullet sizing, the Deemax Enduro SL 27.5, benefits from the most advanced Mavic technologies to provide you with confidence and ultra-reactive handling.

Thanks to ISM4D construction, this rim is lighter without compromising resistance, resulting in increased responsiveness for improved handling and better control. The ID360 ratchet hub will be your best ally on tracks synonymous with fast pedalling and requiring serious energy. Give it your all, and your power will be transmitted in full.

Fore technology and Infinity hubs make life easier and improve longevity, allowing for quick replacement of broken spokes without the need to remove the tyre or rim tape—a precious time-saver during a race or whenever such an unpleasant mechanical may occur. Tubeless compatibility with no rim tape (Fore technology) and an enlarged groove make tyre changing ultra-simple and guarantee a perfect, long-lasting seal. This means you can adapt your equipment to suit the terrain or your mood almost on the fly.

The Deemax Enduro SL 27.5 will give you the confidence to tackle any terrain. The enlarged welded rim (30mm internal width) is designed to absorb the most violent impacts, giving your bike extra protection against the aggressive obstacles. It also accommodates DH tyres between 2.00"" and 3.00", allowing riders to choose their favourite setup. Finally, the Black Shield double treatment protects the Deemax Enduro SL 27.5, making it twice as resistant to impacts from rocks and scratches. The rim will remain impeccably black for a long time to come, a testament to its strength and fortitude.

Tested and approved by our most demanding riders, the Deemax Enduro SL 27.5 is the ultimate choice for competition. It's a top-performing technical wheel, built with a focus on ride quality and durability, so that fun doesn't come at the expense of efficiency.

Key technology:

Maxtal aluminium alloy – Light and strong. Exclusive to Mavic, this specific aluminium alloy offers a higher strength to weight ratio than conventional 6106 alloy.
ISM 4D light rim technology – Inter Spoke Milling 4 dimensions is an exclusive Mavic patented concept. The ISM 4D significantly reduces weight and inertia without compromising durability. Quicker accelerations, better handling and more resistance; the right mix to make the most of any ride. The smooth profile also helps reduce aerodynamic drag.
Fore tapeless tubeless technology – Stiffer and stronger. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed in it, leaving the upper rim bridge intact.
Instant Drive 360 freewheel technology – The new Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.
UST tubeless technology – Traction and control. Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.
SUP welding technology – Factory Welded Process, stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.
Black Shield treatment – This treatment doubles the rim's lifespan against stone impacts and scratches. Super strong double coated treatment with a matt finish.
Infinity hub design – Efficient power transfer thanks to optimised non-contact spoke lacing (no noise under load) and tension distribution. The length of the spokes at the front and rear is identical. Maintenance is easy thanks to a tool-free solution.
QRM Auto bearing preload technology – The cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play in the long run.

Technical specification:

Diameter: 27.5"
Weight (rear): 990g
Rim material: Maxtal
Rim height: 22mm
Internal rim width: 30mm
Drilling: 28 holes
Tyre compatibility: Tubeless Ready
Spoke material: Steel
Nipples: Brass, black
Spoke lacing: Crossed 3
Hub body material: Aluminium
Brake type: Disc brake
Disc standard: 6 bolt
Freehub: Shimano Micro Spline or SRAM XD
Axle size: 12x148mm
Minimum tyre width and pressure: 52mm (43 PSI)
Maximum tyre width and pressure: 76mm (36 PSI)
Maximum supported weight: 150kg (bike weight included)

What's included with the wheel?

User guide
UST tubeless valve
2 replacement spokes
Multifunction adjustment wrench

Compatibility:

Available with either a Shimano Micro Spline or SRAM XD freehub. Shimano Micro Spline freehub is compatible with 1x12-speed Shimano Micro Spline Mountain Bike and Gravel cassettes only. SRAM XD driver body (freehub body) is compatible with SRAM XD Mountain Bike cassettes only. Freehub conversion kits can be purchased separately for Shimano HG.
Available with 12x148mm (boost) thru axle spacing. Adapter conversion kits are available separately to convert the rear wheel to boost quick release.
6-bolt disc brake interface for compatibility with 6-bolt disc rotors.

Type	Back Wheels
Discipline	Mountain Bike
Weight	990g (rear)
Brake Type	Disc Brake
Nipples Material	Brass
Tyre Compatibility	Tubeless
Spokes Material	Steel
SKU	358707