
Shimano Altus FD-M310 3 Speed Front Derailleur, Conventional Swing
3 speed front derailleur
For 7/8 speed gear systems
Compatible with 42-48T outer chainring
Shimano Altus FD-M310 3 Speed Front Derailleur
Low-friction wide linkage reduces shifting effort and increases rigidity
Dual pull design allows it to be used with top or bottom cable routing
Available in either conventional swing or top swing
Multi clamp band is compatible with all seat tube diameters including 34.9mm , 31.8mm and 28.6mm (Adapters are included for 31.8 and 28.6mm)
66-69 degree chainstay to seat tube angle range
For outer chainring size from 42 to 48 tooth, total capacity 20 teeth
Compatible with 7- or 8-speed drivetrains
Altus wide link 7/8-speed compatible dual pull multi-fit front derailleur for recreational off-road use
The FD-M310 3 speed front derailleur is available in either conventional swing or top swing designs, this is with reference to where the clamp band is positioned relative to the derailleur cage, with a conventional swing derailleur the clamp band is above the cage where as a top swing design has the clamp band located under the cage.
The FD-M310 derailleur is compatible with the below models of shifters:
Acera SL-M360-L
Altus SL-M310-L
Shimano SL-M315-L
Tourney SL-RS47-L
Tourney SL-RS45-L
Tourney SL-RV400-L
Tourney SL-RV400-LN
Altus ST-M310-L2
Altus ST-M310-L4
Tourney ST-TX800-L
Acera ST-EF65-L2
Acera PLUS ST-EF65-L4
Acera ST-EF500-L2A
Acera ST-EF500-L4A
Altus ST-EF510-L2A
Altus ST-EF510-L4A
Acera ST-EF505-L
Tourney SL-RS36-L
Tourney SL-RS35-L
Revoshift SL-RV300-L
Revoshift SL-RV200-L
Tourney SL-TX50-L
Type | Gear Shifters, Derailleurs & Spares |
SKU | 799854 |