Halfords Vauxhall Mineral Black Scratch & Chip Repair Kit

The touch up paint is the ideal way to repair small unsightly scratches and stone chips on your cars bodywork, blending them in with an exact colour match. Simply use the special glass fibre prep tool to remove any loose/flaking paint and all rust from the chip or scratch. Then apply the high build primer filler using the precision nib applicator or brush into the prepared rust free chips and scratches, building up the thickness in stages (leaving 10-20 minutes between coats) leaving 24 hours to harden.

Lightly rub down using the abrasive side of the special tool to achieve a smooth finish, then apply your colour match using the precision nib applicator or brush to the prepared and primed chips or scratches. Build up the colour in stages by leaving 10-20 minutes between each coat*. Leave the paint for 24 hours to harden then simply buff the surface using the fabric side of the special tool to blend in the repair.

NB. Always test on an inconspicuous area.

• 3 x 12.5ml pen set
• Vauxhall manufacturers code: GB0,506B

• For metallic or pearlescent finishes allow your colour match paint 24 hours to harden before applying the Clear Protection Lacquer in stages allowing 10 minutes between each coat.
• To find the manufacturer's colour code, look for the identification plate. In most cases this will be under the bonnet, in the boot or inside the driver's side door frame. The Halfords Vauxhall Mineral Black scratch & chip repair kit is compatible to Vauxhall code: GB0,506B

• Compatible with various Vauxhall models from 2016-2020