Einhell 5 Speed Bench Drill

Einhell 5 Speed Bench Drill

The Einhell bench drill is a practical, precise machine for special tasks: Due to the extra-large projection of 104 mm, large workpieces made of wood or metal can be reliably provided with pinpoint holes. With 450W power and 5-step speed adjustment from 600 to 2650 rpm, material-appropriate and precise drilling is possible.

The bench drill can be used at very low and very high speeds and is excellently suited for hard materials e.g. metal and soft material e.g. wood. Exact drill holes are possible thanks to adjustable depth stop. Maximum drilling depth of 50mm.

The bench drill can be varied continuously by the height-adjustable drill table. In addition, the drilling table can be rotated up to 90° and tilted up to 45°.

The rubberised, three-armed rotating handle proves itself due to the favourable lever effect at exact contact pressure without the expenditure of force. The foldable chip guard and zero-voltage on/off switch prevent the machine from unintentional startup after power failure.