Autoglym Polar Wash 2.5L

Autoglym Polar Wash 2.5L

• Effective cleaner for home pressure washers

• Suitable for Paintwork

• Not suitable for use on soft top convertibles

• Safe and effective cleaner

Safe and effective cleaner for home pressure washers

Autoglym Polar Wash gives pole to pole exterior perfection, a safe and effective cleaner for home pressure washers.

Polar Wash should be applied using a pressure washer with a foam gun after pre-washing with a snow foam such as Autoglym Polar Blast - opens in a new tab.

Usage direction:

• Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.

• We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination.

• Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car.

• Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

• The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.

• Rinse thoroughly from the bottom up and dry.

Additional Notes:

• This impressive cleaner will cover your vehicle in a thick blanket of foam that makes light work of dirt, traffic film and road grime removal.

• Cleaning Stage : Pre Wash

• Shop the bundle here: Autoglym Polar Car Cleaning Bundle - opens in a new tab

• Click here - opens in a new tab to find out more about the Autoglym range.